Pioneer GM-4200 Servis Kılavuzu - Sayfa 5
Amplifikatör Pioneer GM-4200 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer GM-4200 35 sayfaları. Bridgeable power amplifier
Ayrıca Pioneer GM-4200 için: Servis Kılavuzu (36 sayfalar)
Sayfayı YazdırGM-HSOQ
Connecting the leads (supplied)
Connecting the speaker leads
The speaker output mode can be two-channel (stereo), one-
channel (mono), or three-channel (stereo + mono}. Connect
the speaker leads to suit the mode. To connect the speaker
leads to the speaker terminals of the amplifier, see the
connection diagram for each channel. Be careful with the
polarity (+ and -}, and with which channel ts which (left [L]
and right [R]).
• If the amplifier is used in three-channel mode, inductors
and capacitors are needed. For more information, see
"Three-channel mode (stereo + mono)".
Two-channel mode (stereo)
5#irtir
© » ©
© L ©
©-ha-©
_t f t t
© ® © e
Speaker output
Speaker output
(right)
(left)
One-channel mode (mono)
StMMi M(mI
© » S
©
L ©
©— Mm-©
The following examples (1 and 2) require advanced
understanding of electronics. If you do not understand the
diagram, please have the work done by your nearest authorized
Pioneer installation specialist.
Three-channel mode (stereo + mono)
The power amplifier is basically a two-channel/one-channet
bridgeable amplifier, but three channels can be achieved by
combining the stereo and mono modes using inductors
and capacitors. Some typical examples are given below.
Example 1 Three-channel, two-way system
5