Pioneer GM-A4604 Kullanıcı El Kitabı - Sayfa 6

Amplifikatör Pioneer GM-A4604 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer GM-A4604 19 sayfaları. Bridgeable four-channel power amplifier
Ayrıca Pioneer GM-A4604 için: Kullanıcı El Kitabı (49 sayfalar), Kullanıcı El Kitabı (14 sayfalar)

Sayfayı Yazdır

Section

Setting the unit

! Bass boost level setting applies only to

CHANNEL B (channel B) output.

6 Power indicator

The power indicator lights up to indicate

power ON.

Setting gain properly

! Protective function included to prevent

malfunction of the unit and/or speakers

due to excessive output, improper use or

improper connection.

! When outputting high volume sound etc.,

this function cuts off the output for a few

seconds as a normal function, but output

is restored when the volume of the head

unit is turned down.

! A cut in sound output may indicate impro-

per setting of the gain control. To ensure

continuous sound output with the head

unit at a high volume, set amplifier gain

control to a level appropriate for the preout

maximum output level of the head unit, so

that volume can remain unchanged and to

control excess output.

! Despite correct volume and gain settings,

the unit sound still cuts out periodically. In

such cases, please contact the nearest

authorized Pioneer Service Station.

Gain control of this unit

Preout level: 2 V

(Standard: 500 mV)

Preout level: 4 V

Above illustration shows NORMAL gain set-

ting.

Relationship between amplifier gain

and head unit output power

If amplifier gain is raised improperly, this will

simply increase distortion, with little increase

in power.

Signal waveform when outputting at

high volume using amplifier gain

control

If the signal waveform is distorted due to high

output, even if the amplifier gain is raised, the

output power will change only slightly.