Pioneer GM-A5602 Kullanıcı El Kitabı - Sayfa 9

Amplifikatör Pioneer GM-A5602 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer GM-A5602 18 sayfaları. Bridgeable two-channel power amplifier
Ayrıca Pioneer GM-A5602 için: Kullanıcı El Kitabı (45 sayfalar), Kullanıcı El Kitabı (11 sayfalar), Kullanıcı El Kitabı (49 sayfalar)

Sayfayı Yazdır

Connecting the units

One-channel output

1 Speaker (Mono)

Connections when using

the speaker input wire

Connect the car stereo speaker output wires

to the amplifier using the supplied speaker

input wire.

! Do not connect both the RCA input and the

speaker input at the same time.

1 Car Stereo

2 Speaker output

3 White/black: Left

4 White: Left

5 Gray/black: Right

6 Gray: Right

7 Speaker input connector

To speaker input terminal of this unit.

Note

If speaker input wires from a headunit are con-

nected to this amplifier, the amplifier will automa-

tically turn on when the headunit is turned on.

When the headunit is turned off, the amplifier

turns off automatically. This function may not

work with some headunits. In such cases, please

use a system remote control wire (sold sepa-

rately). If multiple amplifiers are to be connected

together synchronously, connect the head unit

and all amplifiers via the system remote control

wire.

Connecting the power

terminal

The use of a special red battery and ground

wire RD-223 (sold separately) is recom-

mended. Connect the battery wire directly to

the car battery positive terminal

ground wire to the car body.

WARNING

If the battery wire is not securely fixed to the term-

inal using the terminal screws, there is a risk of

overheating, malfunction and injury, including

minor burns.

Route battery wire from engine com-

partment to the vehicle interior.

! When drilling a cable pass-hole into the ve-

hicle body and routing a battery wire thor-

ough it, take care not to short-circuit the

wire damaging it by the cut edges or burrs

of the hole.

After completing all other amplifier connec-

tions, finally connect the battery wire terminal

of the amplifier to the positive

inal.

1 Positive

2 Engine compartment

3 Vehicle interior

4 Fuse (30 A) × 2

and the

battery term-

terminal

Section