Pioneer M-NS1 Kullanım Talimatları Kılavuzu - Sayfa 29
Amplifikatör Pioneer M-NS1 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer M-NS1 40 sayfaları. Stereo power amplifier
Ayrıca Pioneer M-NS1 için: Servis Kılavuzu (4 sayfalar), Manuel (32 sayfalar)
Sayfayı Yazdır
See page
15
for detailed instructions on loading discs.
If the disc has started playing, press 7.
4
¶ 8
The tape deck goes into record-pause mode, waiting for you to
start the CD.
Recording starts automatically with the CD.
Once the track or disc has finished, the tape deck goes back
into record-pause mode — press 7 to fully stop recording.
Should you want to stop recording before the track/disc has
finished playing, simply press 7 any time during the
recording.
If the recorder has to switch the side of the tape half
way through a track, recording will start again on the other
side from the beginning of the same track. This means you
don't get a single track spread over two sides of a tape.
¢
Usually, when recording a CD or MD, the synchro-recording
feature is the easiest way to do it. However, if you want to
record from the tuner or from a component connected to the
auxiliary inputs, you'll need to start and stop the recording
manually.
DIRECT PLAY 3
TAPE
• Load a cassette
• Set the record direction
• Set the reverse mode
• Switch Dolby NR on/off.
For example, if you want to record from the tuner, press tuner,
and tune into a station.
If you are recording from another component, set it up ready
for playback.
¶ 8
The
tape deck
goes into record-pause mode.
If you're recording from a component that requires you to
start playback (a turntable or another cassette deck, for
example), start playback here.
To pause recording, press ¶ 8. To resume, press
7
.