Pioneer PRS-D4200F - Premier Amplifier Kullanıcı El Kitabı - Sayfa 4
Amplifikatör Pioneer PRS-D4200F - Premier Amplifier için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer PRS-D4200F - Premier Amplifier 50 sayfaları. Bridgeable four-channel power amplifier
Ayrıca Pioneer PRS-D4200F - Premier Amplifier için: Kullanıcı El Kitabı (20 sayfalar), Servis Kılavuzu (38 sayfalar)
Sayfayı Yazdır
Before Using This Product
CAUTION
Never replace the fuse with one of greater
•
value or rating than the original fuse. Use of
an improper fuse could result in overheating
and smoke and could cause damage to the
product and injury including burns.
• Use the supplied hexagonal wrench to tight-
en screws when fastening wires to the termi-
nal. The use of a long, commercially avail-
able hexagonal wrench can cause excessive
torque to be applied possibly resulting in
damage to terminals and wires.
Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
1 Register your product. We will keep the details of
your purchase on file to help you refer to this
information in the event of an insurance claim
such as loss or theft.
2 Receive updates on the latest products and tech-
nologies.
3 Download owner's manuals, order product cata-
logues, research new products, and much more.
3
CAUTION
Diagram A - Proper
Diagram B - Improper
8
+
-
Ohm
Speaker
8
+
-
Ohm
Speaker
L+
R-
Pioneer
Amplifier
4 Ohm Bridged Mode
Do NOT install or use your Pioneer ampli-
fier by wiring speakers rated at 4 Ohm (or
lower) in parallel to achieve a 2 Ohm (or
lower) bridged mode (Diagram B).
Amplifier damage, smoke, and overheat-
ing could result from improper bridging.
The amplifier surface could also become
hot to the touch and minor burns could
result.
To properly install or use a bridged mode
for a two-channel amplifier and achieve a
4 Ω load, wire two 8 Ω speakers in parallel
with Left + and Right – (Diagram A) or
use a single 4 Ω speaker. For a four-chan-
nel amplifier, follow the speaker output
connection diagram for bridging as shown
on the back of your amplifier, and wire
two 8 Ω speakers in parallel to achieve a 4
Ω load or use a single 4 Ω speaker per
channel.
If you have any questions or concerns,
please contact your local authorized
Pioneer dealer or call Pioneer customer
service.
4
+
-
Ohm
Speaker
4
+
-
Ohm
Speaker
L+
R-
Pioneer
Amplifier
2 Ohm Bridged Mode