Pioneer SA-560 Servis Kılavuzu - Sayfa 5

Amplifikatör Pioneer SA-560 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer SA-560 17 sayfaları.
Ayrıca Pioneer SA-560 için: Kullanım Talimatları Kılavuzu (36 sayfalar)

Sayfayı Yazdır

BALANCE

control

Should

normaily

be left in the center

position.

Adjust

balance if the sound is louder from one of the speakers. If the

right side is louder, turn toward the left position and if the

left side is louder,

turn toward the right position.

LOUDNESS switch

Use when listening at low volume levels.

[OFF] —

Released position: Should normally be left in this

position.

{ON] —

Depressed position: Boosts low and high frequen-

cies to give added punch to playback even at low volume.

1) ADAPTOR/TAPE2(/CD/VIDEO) switch

Use when there is an adaptor component (graphic equalizer,

etc.), compact disc player, video cassette recorder or tape

deck connected to the ADAPTOR/TAPE 2 terminals.

[OFF] — ADAPTOR/TAPE2

indicator goes out: When not

in use.

[ON] — ADAPTOR/TAPE2

indicator lights: When using

the adaptor

component

or listening to the component

connected to the ADAPTOR/TAPE2 terminals.

NOTE:

When no connections are made to the ADAPTOR/TAPE 2 ter-

minals,

or when they are not in use, be sure to set this switch to

the OFF position. {No sound will be heard if it is set to the ON posi-

tion.)

@ FUNCTION switches

Use to select playback source.

[TUNER]

—

Press when listening to AM or FM broadcasts

with a tuner.

[TAPE 1] —

Press when listening to tape playback with a

tape deck.

NOTE:

Function switches should be pressed firmly; otherwise, all the func-

tion indicators will light, and no output will be produced. If this oc-*

curs, press the desired function switch again.