Pioneer VSX-405 Kullanım Talimatları Kılavuzu - Sayfa 2
Amplifikatör Pioneer VSX-405 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSX-405 29 sayfaları. Audio/video stereo receiver
Ayrıca Pioneer VSX-405 için: Kullanım Talimatları Kılavuzu (28 sayfalar), Servis Kılavuzu (11 sayfalar), Servis Kılavuzu (37 sayfalar)
Sayfayı Yazdır
IMPORTANT
The lightning flash with
a r
tnangle, is intended te
uninasulated."dangero
enclosure
that ray
constitute a risk of electri
ufficient magnitude
to
ck to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING
TO QUALIFIED
SERVICE PERSONNEL.
ateral tnangie is
i important
READ INSTRUCTIONS - All the safety and operating
instructions should be read before the appliance
is operated.
RETAIN INSTRUCTIONS -~ The safety and operating
instructions should be retained for future
reference.
HEED WARNING - All warnings on the appliance
and in the operating
instructions
should
be
adhered to.
FOLLOW INSTRUCTIONS - All operating and use
in-structions should be followed.
;
WATER AND MOISTURE - The appliance should
not be used near water - for example, near a
bathtub, washbow/l,
kitchen sink, laundry tub,
in a wet base-ment, or near
a swimming
pool,
etc.
LOCATION - The appliance should be installed ina
stable location.
WALL OR CEILING MOUNTING - The appliance
should not be mounted to a wall or ceiling.
VENTILATION ~ The appliance should be situated
so that its location or position does not interfere
with its proper ventilation. For example, the
appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the
ventilation openings; or, placed in a builtin
installation, such as a bookcase
or cabinet that
may
impede
the flow of air through
the
ventilation openings.
HEAT - The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
POWER
SOURCES
- The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance,
POWER-CORD PROTECTION ~ Power-supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them. Pay particular attention to
cords at plugs, convenience
receptacles,
and
the point where they exit from the appliance.
POLARIZATION
- If your purchased product is
provided with a polarized power plug, please
read the following instructions. This product is
equipped with a polarized alternating current
line plug {a plug having one blade wider than
the other). This plug
will fit into the power
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
CLEANING ~ The appliance should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides
or other volatile liquids since they may corrode
the cabinet.
POWER LINES - An outdoor antenna should be
located away from power lines.
NONUSE
PERIODS
- The power cord of the
appliance should be unplugged from the outlet
when left un-used for a long period of time.
OBJECT AND LIQUID ENTRY - Care should be
taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
DAMAGE
REQUIRING SERVICE - The appliance
should be serviced by a Pioneer authorized
service center or qualified service personnel
when:
®
The power-supply
cord or the plug has been
damaged.
®
Objects have fallen, or liquid has been spilled
into the appliance.
@
The appliance has been exposed to rain.
®
The appliance does not appear to operate
normally
or exhibits
a marked
change
in
performance.
®
The
appliance
has
been
dropped
or
the
enclosure damaged.
SERVICING -- The user should not attempt to service
the appliance
beyond
that described
in the
operating
instructions.All
other servicing
should
be
referred
to
qualified
service
personnel.
—«
GROUND.
CLAMP
ELECTRIC
SERVICE
es
EQUIPMENT—__
Doe -
E
=~
GROUND CLAMPS
SAFETY INSTRUCTIONS -
OUTDOOR ANTENNA GROUNDING
lf an outside
antenna is connected to the antenna terminal,
be sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges.
In the U.S.A. section 810 of the National
Electrical
Code,
ANSI/NFPA
70,
provides
information with respect to proper grounding
of the mast and supporting structure, grounding
of the lead-in wire to an antenna
discharge
unit, size of grounding conductors,
location of
antenna
discharge
unit,
connection
to
grounding
electrodes,
and
requirements
for
the grounding electrode. See Fig. A.
CART - An appliance and cart combination
should
ANTENNA
LEAD IN
WIRE
ANTENNA
be moved
with care.
Quick stops, excessive
force, and uneven
surfaces may cause the
appliance and cart combination
to overturn.
NEC - NATIONAL ELECTRIC CODE
DISCHARGE UNIT
(NEC SECT
GROUNDIN
(NEC SECT
ON 810 ~ 20)
G CONDUCTORS
ON 810 ~ 21)
Fen————=
POWER SERVICE GROUNDING
ELECTRODE SYSTE
(NEC ART 250, PART
FIG. A
H)
Information to User
equipment.
2
<ARB7065>