Pioneer 156729 Kullanım Kılavuzu - Sayfa 24
CD Çalar Pioneer 156729 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer 156729 28 sayfaları.
Sayfayı Yazdır
Setting for MP3
Setting MP3 Preferences
The MP3 preferences let you change the way MP3
file information is displayed and the way MP3 CDs
are played.
ENTER
SETUP
The MP3 preferences can be set only when
playback is stopped.
1
Press the [SETUP] button.
2
Use the [
]/[
preference you want to change.
The preferences are explained in the next column.
3
Press the [ENTER] button.
4
Use the [
]/[
preference's options.
To cancel the procedure at any point, press
the [
] button.
∫
5
Press the [ENTER] button.
When the preference has been set, "COM-
PLETE" appears on the display.
Preferences
Below, the name of each preference is followed by
its options in parentheses, with the default option in
bold.
∫ DISC NAME (Display/Not)
This preference determines whether the disc name
is displayed when an MP3 disc is loaded.
∫ FILE NAME (Scroll/Not)
This preference determines whether the file name
scrolls across the display when an MP3 file is
selected.
24
En-
] buttons to select the
] buttons to select the
∫ FOLDER NAME (Scroll/Not)
This preference determines whether the folder
name scrolls across the display when an MP3
folder is selected.
In Navigation mode (see page 18), the folder name
scrolls across the display regardless of this setting.
∫ BAD NAME (Replace/Not)
This preference determines whether file and folder
names that contain undisplayable characters are
replaced with "File n" or "Folder n," "n" being the file or
folder number. When set to Not Replace, displayable
characters are displayed and underscore characters
are used in place of any undisplayable characters.
For ID3 tags, underscore characters are used in place of
undisplayable characters regardless of this preference.
Note:
File and folder names are scrolled in Navigation
mode (page 18) regardless of the FILE NAME and
FOLDER NAME preferences.
∫ ID3 VER. 1 (Read/Not Read)
This preference determines whether version 1.0/
1.1 tags are read and displayed. When set to Not
Read, version 1.0/1.1 tags are not displayed.
∫ ID3 VER. 2 (Read/Not Read)
This preference determines whether version 2.2/
2.3/2.4 tags are read and displayed. When set to
Not Read, version 2.2/2.3/2.4 ID3 tags are not
displayed.
∫ CD EXTRA (Audio/MP3)
This preference applies to CD Extra discs and
determines whether music in the audio session or
MP3 files in the data session are played.
∫ JOLIET (Use SVD/ISO9660)
This preference applies to MP3 discs in Joliet format
and determines whether the CD-Player reads the SVD
data or treats the disc as an ISO 9660 disc. Normally,
this preference doesn't need to be changed.
SVD (Supplementary Volume Descriptor) supports
long file and folder names and characters other than
letters and numbers. Some CD burning software
refers to the Joliet format as "Windows format."
∫ HIDE NUMBER (Disable/Enable)
This preference determines whether the numbers at
the beginning of file and folder names are hidden.
When you create an MP3 CD on a personal com-
puter, you cannot normally determine the playback
order of the files. However, if you number the MP3
files in order, starting with 01, 02, 03, and so on,
they will play in that order. If you don't want these
numbers to appear on the display, choose Enable.
The following table shows a few examples of
numbered file and folder names and how they will
appear with the Disable and Enable options.