Pioneer PD-F507 Kullanım Talimatları Kılavuzu - Sayfa 12
CD Çalar Pioneer PD-F507 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer PD-F507 30 sayfaları. File-type compact disc player
Ayrıca Pioneer PD-F507 için: Servis Kılavuzu (10 sayfalar), Servis Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar)
Sayfayı Yazdır
To program tracks/discs in a desired
order (PROGRAM play)
÷ You can operate PD-F507 by remote control unit and also by the
main unit.
÷ You can program up to 32 steps
÷ The parenthesis ( ) show operations for the main unit.
Operation example)
Programming disc 2 , track 7 as step 1,
and disc 5, track 3 as step 2.
Press PGM (PROGRAM)
during stop mode.
PROGRAM
(
)
Use the digit buttons to
select the disc, and press
DISC SET.
(Use DISC (–, +) to select the disc
number,then press PROGRAM.)
=
(
Use the digit buttons to
select the track, and press
TRACK SET.
(Use 4/¢ to select the track
number, then press PROGRAM.)
=
(
41
¡¢
Repeat steps 2 and 3 to
program additional discs
\
and tracks.
Once the track times have been
added, the PGM indicator stops
blinking and the following display
\
appears (Total Time).
=
=
(
12
VARIOUS OPERATIONS
En
VARIOUS OPERATIONS
)
The "PGM" indicator blinks.
DISC
TRACK
MIN
SEC
PGM
DISC
TRACK
MIN
SEC
)
PGM
DISC
TRACK
MIN
SEC
PGM
=
41
¡¢
3
The following operations can be performed during
normal play
<Programming tracks during normal play>
(Direct program)
1. Press PGM (PROGRAM).
•Program mode is activated.
2. Press PGM (PROGRAM) during playback.
•The current track is programmed
<Programming during normal playback (remote
control only)>
(Pre-programming)
You can program during normal playback
(\ Operation example
• The player changes to program play when the current track
finishes playing back.
To change to program mode directly, press 3.
•
The following operations can only be performed
during stop mode
<Programming an entire disc as one step>
(Full disc program)
If you skip step
of the operation example, disc 2 is programmed
as step 1.
<Programming a pause (remote control only)>
(Pause program)
If you press 8 at step
8 , "PA" appears in the display instead of the disc number.
÷ For example, when making a program for recording both sides of
a cassette tape, press 8 to insert a pause after programming the
tracks for one side. After turning the tape over, press 8 to resume
recording.
Notes
÷ You cannot program a pause as the first step, or program two
pauses in a row.
÷ When you program a pause, it counts as 1 step and reduces the
total number of tracks you can program.
÷ To erase a program...
Press 7 twice during playback (or once in stop mode). Press
MODE or RANDOM in either play or stop mode. You can also
erase the program by pressing PREVIOUS (or BEST in stop
mode).
÷ To cancel a program step
In stop mode, each time you press CLEAR, the last step in the
program is erased.
÷ If a programmed disc is missing or inserted backwards during
program play, "**-no dISC" appears in the display, the step is
automatically erased, and playback proceeds to the next step.
÷ Program contents are stored in memory even when the power
is turned off (STANDBY).
Notes!!
÷ If step
is carried out before the accumulated time is
displayed, the program play starts and the time is not displayed.
÷ The display is not shown if the total time of the program is 100
)
minutes or more.
Press 3.
The program play starts from the
track that was programmed first.
DISC
TRACK
)
, you can program a pause. When you press
MIN
SEC
PGM