Pioneer PD-F507 Kullanım Talimatları Kılavuzu - Sayfa 9
CD Çalar Pioneer PD-F507 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer PD-F507 30 sayfaları. File-type compact disc player
Ayrıca Pioneer PD-F507 için: Servis Kılavuzu (10 sayfalar), Servis Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar)
Sayfayı Yazdır
÷ You can operate PD-F507 by remote control unit and also by the
main unit.
÷ You can operate PD-F407 by the main unit.
STANDBY indicator
3
To listen in order from the first track
Press STANDBY/ON.
To turn the power off...
Press STANDBY/ON again.
STANDBY indicator lights.
Load discs into the rack.
Close the hood.
÷ Playback is not possible when the
Label side faces right
Press 3.
The tracks are played in order
3
starting from the first track on the
disc with the lowest disc No.
÷ If you choose a play mode beforehand, the tracks/discs are played
back according to the respective play mode.
To stop play
Press7.
7
To pause play
Press 8.
To start play again, press 3 or 8.
8
To skip to another track
Tap 41/¡¢ (or 4/¢ on
41
¡¢
the remote control unit).
To fast forward/reverse.
Hold down 41/¡¢ (or
41
¡¢
1/¡ on the remote control unit).
BASIC OPERATIONS
MODE
41/¡¢
7
8
«
P. 8
hood is open.
MODE
Digit buttons
DISC SET
1 ¡
7
8
To select the disc and track
(PD-F507 only)
Use the digit buttons to
\
select the disc, then press
DISC SET.
Use the digit buttons to
select the track, and press
\
TRACK SET.
÷ DISC SET or TRACK SET should be pressed in less than 5
seconds after pressing the last numeric button.
÷ If the disc has not been loaded in the selected position, "** no
dISC" is displayed for 3 seconds.
To select a play mode
Press MODE during play or stop mode.
Press a few times to choose the mode you desire.
Playback occurs according to the chosen mode.
ALL:
All discs are played back
SINGLE:
One disc is played back
CUSTOM: Only discs stored in the CUSTOM file are played back
(Ι Ι Ι Ι Ι , ΙΙ ΙΙ ΙΙ ΙΙ ΙΙ, ΙΙΙ ΙΙΙ ΙΙΙ ΙΙΙ ΙΙΙ)
(see page
to create a custom file).
P. 10
3
ALL
In stop mode:
CUSTOM (ΙΙΙ
3
ALL
During playback:
÷ When you select SINGLE during playback, only the current disc
will be played.
÷ If you press MODE during program mode, the program contents
will be erased.
Notes!!
÷ When you turn the power ON, playback starts according to the last
selected play mode.
÷ If you did not select a play mode, playback starts in ALL.
<Last disc memory>
When you press 7 or turn the power OFF, the unit memorizes the disc
that was being played. The next time you press 3, playback will start
from that same disc.
TRACK SET
4 ¢
3
3
SINGLE
2
ΙΙ
2
Ι)
2
3
SINGLE
BASIC OPERATIONS
9
En