Pioneer PD-M400 Kullanım Talimatları Kılavuzu
CD Çalar Pioneer PD-M400 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer PD-M400 23 sayfaları. Multi-play compact disc player
Sayfayı Yazdır
Operating
Instructions
MULTI-PLAY
COMPACT
DISC PLAYER
OO
OlISc
DIGITAL AUDIO
MRIGNEER mureay commacr owe maven PIMA) 5
ownn
nx
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings.
However,
the method
of con-
necting and operating the unit is the same.
WARNING: 10 PREVENT FIRE OR SHOCK HAZ-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian
models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your
security.
[For Canadian
model]
CAUTION :10 PREVENT ELECTRIC SHOCK
DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:pour
preveniR
LES
CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
"This product is manufactured to comply with the radio inter-
ference
requirements
of
EEC
Directive
76/889/EEC
and
82/499/EEC."
f
LINE VOLTAGE
SELECTOR
SWITCH
Only multi-voltage
models
are provided
with
this
switch. U.S., Canadian, European, U.K., and Austra-
lian models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
only.
Never
use
this model
with
110V
setting
in
Saudi Arabia.
The
line voltage
selector
switch
is located
on the rear
panel of this player. Before your player is shipped from
the factory,
the switch
is set to the power
requirements
of the player's destination.
Check
that it is set properly
before
plugging
the
power
cord
into the outlet.
If the
voltage is not properly set or if you move to an area where
the voltage requirements differ, adjust the selector switch
as follows:
e@
Provide
yourself
with
a
medium-sized
(flat-blade)
screwdriver.
Insert the tip of the screwdriver into the
groove of the selector switch and turn it so that the
power voltage marking of your area points to the arrow.
VOLTAGE
SELECTOR
@) PIONEER'
The future of sound and vision.