Pioneer PD-T303 Kullanım Talimatları Kılavuzu

CD Çalar Pioneer PD-T303 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer PD-T303 16 sayfaları. Twin-tray compact disc player

Sayfayı Yazdır
Operating
Instructions
TWIN-TRAY COMPACT
DISC
PLAYER
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
in some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings.
However,
the method
of con-
D-TSOS3
DIGITAL AUDIO
necting and operating the unit is the same.
WARNING 70 prevent FIRE OR SHOCK Haz-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your
security.
[For Canadian model]
CAUTION:10
prevent ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION: pour
prevenin
Les
cHocs
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
"This preduct is manufactured to comply with the radio inter-
ference
requirements
of EEC
Directive
76/889/EEC
and
82/499/EEC.""
LINE VOLTAGE
SELECTOR
SWITCH
Only muiti-voltage
models
are provided
with this
switch. U.S., Canadian, European, U.K., and Austra-
lian models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
only.
Never
use
this modei
with
110V
setting
in
Saudi Arabia.
The line voltage selector switch is located on the rear
panel of this player. Before your player is shipped from
the factory, the switch is set to the power require-
ments of the player's destination. Check that it is set
properly before plugging the power cord into the out-
let. If the voltage is not properly set or if you move
to an area where the voitage requirements differ, ad-
just the selector switch as follows:
e Use a medium-sized (fiat-blade) screwdriver. Insert
the tip of the screwdriver into the groove of the
selector switch and turn it so that the power val-
tage marking of your area points to the arrow.
VOLTAGE
SELECTOR
@) PIONEER'
The future of sound and vision.