Pioneer Super Tuner IIID DEH-P5800MP Kullanım Kılavuzu - Sayfa 25
CD Çalar Pioneer Super Tuner IIID DEH-P5800MP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer Super Tuner IIID DEH-P5800MP 38 sayfaları. Owner's manual
Ayrıca Pioneer Super Tuner IIID DEH-P5800MP için: Kurulum Kılavuzu (6 sayfalar), Kullanıcı El Kitabı (34 sayfalar)
Sayfayı Yazdır
Multi-CD Player
Scrolling text information in the display
This unit can display the first 8 letters only of DISC TTL, ART NAME, TRK TTL and
ART NAME. When the recorded information is longer than 8 letters, you can scroll the
text to the left so that the rest of the title can be seen.
* Press DISPLAY and hold until the title begins to scroll to the left.
The rest of the title will appear in the display.
Using compression and bass emphasis
You can use these functions only with a multi-CD player that supports them.
Using COMP (compression) and DBE (dynamic bass emphasis) functions lets you
adjust the sound playback quality of the multi-CD player. Each of the functions has a
two-step adjustment. The COMP function balances the output of louder and softer
sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound.
Listen to each of the effects as you select them and use the one that best enhances
the playback of the track or CD that you are listening to.
1. Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the display.
• If the multi-CD player does not support COMP/DBE, NO COMP is displayed when
you attempt to select it.
2. Press 8 or 2 to select your favorite setting.
Press 8 or 2 repeatedly to switch between the following settings:
COMP OFF – COMP 1 – COMP 2 – COMP OFF – DBE 1 – DBE 2
Audio Adjustments
Introduction of audio adjustments
CUSTOM indicator
Shows when custom equalizer
curve is currently selected.
Equalizer curve
Shows which equalizer preset is
currently selected.
Audio display
Shows the audio adjustment status.
SW indicator
Shows when the subwoofer output is turned on.
EQ-EX indicator
Appears in the display when EQ-EX function can be activated.
LOUD indicator
Appears in the display when loudness is turned on.
* Press AUDIO to display the audio function names.
Press AUDIO repeatedly to switch between the following audio functions:
FAD (balance adjustment) – EQ (equalizer curve adjustment) – BASS (bass and
treble level adjustment) – LOUD (loudness) – SUB, W (subwoofer on/off setting)/
NOFAD (non fading output on/off setting) – 80: 0 (subwoofer setting)/NOFAD (non
fading output setting) – HPF (high pass filter) – SLA (source level adjustment)
• If EQ-EX function has been selected and only when EQ-EX is turned on and
CUSTOM is selected as the equalizer curve, you can switch to BASS.
• When the subwoofer controller setting is P/O:FUL, you cannot switch to SUB, W.
(Refer to page 31.)
• You can select the 80: 0 only when subwoofer output is turned on in SUB, W.
• When the subwoofer controller setting is only P/O:FUL, you can switch to the
nonfading output on/off setting. (Refer to page 31.)
• You can select the nonfading output setting only when nonfading output is turned on
in the nonfading output on/off setting.
• When selecting the FM tuner as the source, you cannot switch to SLA.
• To return to the display of each source, press BAND.
Note
• If you do not operate the audio function within about 30 seconds, the display is automatically
returned to the source display.
25