Pioneer LD-V4200 Servis Kılavuzu - Sayfa 7

DVD Oynatıcı Pioneer LD-V4200 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer LD-V4200 41 sayfaları. Product information buleltin: level i - manual control
Ayrıca Pioneer LD-V4200 için: Ürün Bilgi Bülteni (2 sayfalar)

Sayfayı Yazdır

•

, .

[Bonnet]

1. Remove the 2 screws

from the sides.

2. Remove the 2 screws

from the back.

[Bottom Plate]

1. Remove the 2 screws

C,.

2. Remove the 4 screws

[Disc Table]

1. Remove the bonnet.

2. Turn on the Power Switch, press the key to remove disc

to open the disc table.

3. Remove the 2 rivets

C,.

Note:

1) Remove the lock roller to prevent its loss.

2) To pull out the disc table without pressing the key, remove

the bottom plate and turn the pulley connected by a belt to

the loading motor 20 turns.

[Front Panel]

1. Remove the bonnet.

2. Remove the 2 screws •

and screw

3. Disconnect the KEYB assembly connectors CN28 and CN45.

[Mechanical Section]

1. Remove the bottom plate.

2. Remove the 4 mounting screws

of the SRVB assembly

and disengage the 3 tabs supporting the SRVB assembly .

3. Disconnect the CN2, CN14, CN24, CN33 and CN37 con-

nectors of the PREB assembly, the CNS connector of the

BLMB assembly and the CN105 connector of the

RLYB·

assembly.

Note: Refer to ''Replacing the Pick-up'' (

P44).