Pioneer KURO PDP-S64 Kullanım Talimatları Kılavuzu - Sayfa 4

Hoparlör Sistemi Pioneer KURO PDP-S64 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer KURO PDP-S64 50 sayfaları. Pioneer speaker system user manual

Sayfayı Yazdır

English

2. Screw an supplied screw into the

speaker mounting hole (lower of the

two) at the top, rear of the ﬂat screen

TV.

Do not tighten it all the way yet. Leave it loose, with

about 5 mm left to tighten.

��

3. Hang the speaker bracket on the

screw you installed at the top by

passing the wide part over it and

lowering into the slot; screw in the

lower screw temporarily.

After passing the wide part of the hole of the speaker

bracket (top) over the screw, lower the speaker onto it.

��

4. Adjust the position of the speaker

and then tighten the upper and lower

screws ﬁrmly.

5. Tighten the two screws, at the top

and bottom for each speaker (total of

four screws), thus ﬁxing the speakers

to the ﬂat screen TV.

6. Pass the supplied speaker cable

between the speaker and the ﬂat

screen TV (below the speaker bracket)

from below.

7. Connect the speaker cables to the

speaker (see next page).

8. Insert the cable in the groove on the

speaker.

��

9. Connect the other end of the speaker

cables to the rear of ﬂat screen TV (see

next page).

��