Ariston WML 601 Talimatlar Kılavuzu - Sayfa 10

Yıkayıcı Ariston WML 601 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Ariston WML 601 36 sayfaları. Front-loading washing machine
Ayrıca Ariston WML 601 için: Kullanım Kılavuzu (14 sayfalar)

Sayfayı Yazdır

Care and maintenance

Cutting off the water and electricity

supplies

• Turn off the water tap after every wash cycle. This will limit

wear on the hydraulic system inside the washing machine

and help to prevent leaks.

• Unplug the washing machine when cleaning it and du-

ring all maintenance work.

Cleaning the washing machine

• The outer parts and rubber components of the applian-

ce can be cleaned using a soft cloth soaked in lukewarm

soapy water. Do not use solvents or abrasives.

• The washing machine has a "Auto Clean" programme

for its internal parts that must be run with no load in the

drum.

For maximum performance you may want to use either the

detergent (i.e. a quantity 10% the quantity specified for lightly-

soiled garments) or special additives to clean the washing

machine. We recommend running a cleaning programme

every 40 wash cycles.

To start the programme press buttons A and B simultaneou-

sly for 5 seconds (see figure).

The programme will start automatically and will last approxi-

mately 70 minutes. To stop the cycle press the START/PAU-

SE button. To stop the cycle press the START/PAUSE button.

Cleaning the detergent dispenser drawer

Remove the dispenser by

raising it and pulling it out

(see figure).

Wash it under running wa-

ter; this operation should be

repeated frequently.

Caring for the door and drum of your

appliance

• Always leave the porthole door ajar in order to prevent

unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump

which does not require any maintenance. Sometimes, small

items (such as coins or buttons) may fall into the pre-cham-

ber which protects the pump, situated in its bottom part.

Make sure the wash cycle has finished and unplug the

appliance.

To access the pre-chamber:

3. clean the inside thoroughly;

4. screw the lid back on;

5. reposition the panel, making sure the hooks are securely

in place before you push it onto the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If there are any

cracks, it should be replaced immediately: during the wash

cycles, water pressure is very strong and a cracked hose

could easily split open.

Never use second-hand hoses.

1. using a screwdriver,

remove the cover panel

on the lower front part of

the washing machine (see

figure);

2. unscrew the lid by rota-

ting it anti-clockwise (see

figure): a little water may

trickle out. This is perfectly

normal;