Pioneer S-FCRW2900-S Kullanım Kılavuzu - Sayfa 3

Hoparlör Sistemi Pioneer S-FCRW2900-S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer S-FCRW2900-S 13 sayfaları. Speaker system

Sayfayı Yazdır

STANDARD SURROUND SETUP

This is a standard multichannel surround sound speaker setup

for optimal 5.1 channel home theater sound.

Center

Front left

Listening position

Surround

left

NON-SKID PADS

If the front, center and surround speakers are placed on a hard

surface, such as wood or tile place four non-skid pads (small)

on the bottom flat surface of the speakers.

If the subwoofer is placed on a hard floor, such as wood or tile,

place four non-skid pads (large) on the bottom surface of the

subwoofer.

Front right

Subwoofer

Surround

right

CABINET MAINTENANCE

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the cabinet is very dirty, clean with a soft cloth dipped in

some neutral cleanser diluted five or six times with water, and

then wipe again with a dry cloth. Do not use furniture wax or

cleaners.

Never use thinners, benzine, insecticide sprays and other

chemicals on or near the cabinets, since these will corrode the

surfaces.

WALL-MOUNTING THE FRONT, CENTER

AND SURROUND SPEAKER SYSTEM

Before mounting

• Remember that the speaker system is heavy and that its weight

could cause the screws to work loose, or the wall material to

fail to support it, resulting in the speaker falling. Make sure

that the wall you intend to mount the speakers on is strong

enough to support them. Do not mount on plywood or soft

surface walls.

• Mounting screws are not supplied. Use screws suitable for

the wall material and support the weight of the speaker.

Mounting screw

(not supplied)

5 mm to 7 mm

NOTE

• If you are unsure of the quality and strength of the walls, consult

a professional for advice.

• Pioneer is not responsible for any accidents or damage that

result from improper installation.

5 mm

10 mm