Pioneer XW-NAV1K-K Kullanım Talimatları Kılavuzu - Sayfa 16

Hoparlör Sistemi Pioneer XW-NAV1K-K için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer XW-NAV1K-K 44 sayfaları. Dvd speaker system for ipod

Sayfayı Yazdır

iPod/iPhone playback

Connecting your iPod/iPhone

Caution

• When connecting an iPod/iPhone units,

always use the universal dock adapter

provided with your iPod/iPhone, or a

commercially adapter designed to support

iPod/iPhone. The iPod/iPhone cannot be

connected without a universal dock

adapter; attempting to connect an iPod/

iPhone without a universal dock adapter

will cause damage or malfunction.

iPod nano/

iPod classic/

iPod touch/

iPhone

Attach the Universal dock adapter to

iPod/iPhone connector port on the front

panel of this unit.

• An iPod/iPhone universal dock adapter is

not supplied with this unit.

When attaching the Universal dock adapter, be

sure to orient the front-back directions of the

Universal dock adapter correctly. To attach,

first place the protruding tabs on the front side

Note

1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.

•

Some iPods allow the TV output setting to be changed while connected.

•

When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state.

of the adapter into the depressions on the

iPod/iPhone connector port and press into

position. When attaching the adapter, be

careful not to strike the connectors.

• If an iPod/iPhone is connected when this

Connecting your TV

To watch iPod/iPhone images on a television,

perform connections using the included audio/

video cable. For details, see Connecting using

an audio/video cable on page 8.

• When an iPod/iPhone is connected to this

• Before making or changing the

Universal

dock

adapter

Connect your iPod/iPhone.

unit is in standby mode, the power will turn

on and playback of the iPod/iPhone will

begin.

unit, the iPod/iPhone's TV output setting is

automatically set to ON.

Caution

connections, switch off the power and

disconnect the power cord from the power

outlet. Plugging in should be the final step.