Pioneer AVD-W8000 Kullanıcı El Kitabı - Sayfa 8

Monitör Pioneer AVD-W8000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer AVD-W8000 18 sayfaları. Color lcd rear display

AVD-W8000_Cgb.fm Page 8 Tuesday, August 22, 2000 4:54 PM

Only the video will be switched between VCR1 and VCR2 when this button is pressed.

• Return to the setting for switching video, audio and external output at the same time.

Press the SP.SEL or V.SEL button for 2 sec. or more.

The video and audio will be switched at the same

time each time that the SELECTOR button is

pressed.

If you press the SP.SEL or V.SEL button when

audio and video are switched with the SELECTOR

button, [SELECTOR] appears in red on the screen,

indicating that the audio and video can be switched

simultaneously using the SELECTOR button.

Adjust the volume of audio output from the built-in speaker.

VOLUME control (2/8) buttons

Press the VOLUME control (2/8) buttons.

8: Turn up

2: Turn down

The volume of the built-in speaker can be

adjusted in a range of 0 to 30. (The volume

level will be displayed for about 4 seconds.)

You can change the way in which normal video (aspect ratio 4:3) enlarges to wide

video (16:9). Select wide modes to suit the kind of video you are viewing, such as news

programs and movies.

WIDE/MENU button

Press the WIDE/MENU button. Each time you press the button, the wide mode is

switched in the following sequence:

[FULL]

[JUST]

[CINEMA]

[ZOOM]

[NORMAL]

Exit to [FULL]

• Separate settings are stored for video from VCR1 and that from VCR2.

• The menu screen always appears in FULL mode (Refer to page 9).

• When video is viewed in a wide mode that does not match its original aspect ratio, it may

appear differently.

• Remember that using the wide mode feature of this system for commercial or public viewing

purposes may constitute an infringement on the author's rights protected by the Copyright

Law.