Pioneer PDP-4271KUCXC Servis Kılavuzu - Sayfa 30
Monitör Pioneer PDP-4271KUCXC için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer PDP-4271KUCXC 39 sayfaları.
Sayfayı Yazdır
1
4. TROUBLESHOOTING
• Network operation failure
A
Note:
The network server should be connected
before the PDP's power-on.
Note:
When the PDP is connected to a
B
network hub, a straight cable is used.
When the PDP is directly connected to
a network server, a cross (reverse)
cable is used.
Note:
When the DHCP server function is
available in your local network, select "
Automatically acquire IP " in " Network
Setup " menu to use the DHCP client
function of PDP. Most of the
broadband routers have the DHCP
server function.
When the DHCP server function is not
available in the network, it needs to
set an appropriate IP address by
yourself.
In this case, make settings as follows.
Subnet mask:
Use the same as the network server
uses.
C
IP Address:
Make the same for the network
address part designated by the Subnet
mask.
For the rest, use the number which
has not been used in the network.
All " 0 " and all " 1 " in binary can not
be used.
For instance, if the network server has
Subnet mask: 255.255.255.0
IP Address: 192.168.201.1
An example for PDP is
Subnet mask: 255.255.255.0
IP Address: 192.168.201.2
Note:
In case of " Windows Media Connect "
server, the number of registerd client is
restricted within 10.
D
30
1
2
Contents via the network server can not
be played!
Can "Home Media Gallery" on "HOME
MENU" GUI be selected?
Then, is the main menu of "Home
Media Gallery" displayed?
yes
By selecting "Media Navigatorî, is the
network server name displayed and
selectable?
No
Before PDP turned on, has the network
server been turned on and connected
to PDP with a network cable?
yes
Confirm that a correct network cable is
used and correctly inserted into both
ethernet terminal.
yes
Confirm that the IP address setting is
properly set up.
yes
If the contents can not be played
though it can be selected, try other
contents.
Then, is there any other contents which
can be played?
The failed contents may be out of
support.
Most of the network server has the
setting to register the client or prohibit
the specific client from accessing.
Is there any register restriction in the
server?
No
There may be something defective in
HNM ass'y.
Replace the HNM ass'y with another
one.
PRO-940HD
2
3
Jump and refer to the sheet of
"Fundamental operation failure".
No
Is the directory in the server displayed?
yes
yes
No
Is the target folder or file in the server
surely shared with the network client?
There may be other restriction in the
server.
With examining the user's manual of
the server, check the server operation
in detail.
Note:
One of the supported video format is WMV.
Try WMV, except that the server does not
support WMV.
Below is the URL from which some WMV
files of 720p resolution are available.
yes
No
http://www.microsoft.com/windows/window
smedia/musicandvideo/hdvideo/contentsho
wcase.aspx
There may be something defective in
HNM ass'y.
Replace the HNM ass'y with another
one.
3
4
yes
4