Pioneer SD-T292 RD/Q1 Kullanım Talimatları Kılavuzu - Sayfa 9

Monitör Pioneer SD-T292 RD/Q1 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer SD-T292 RD/Q1 25 sayfaları. Hi-fi monitor receiver

Sayfayı Yazdır

Pioneer SD-T292 RD/Q1 Kullanım Talimatları Kılavuzu

SPEAKER CONNECTIONS

1. Attach the speakers by hocking them onto the screws at

both sides of the TV.

Right speaker

Left speaker

Rear side of TV

® Arrange excessive speaker cord

around the cord holders on the rear

of the speaker units.

2. Connect the speaker wires to the left and right speaker termi-

nals.

Red tine

Remove your finger from the lever,

@ Connect the wire with the

and gently pull on the wire to confirm

red line to @ . Insert the

that it is securely connected

wire while pressing down

the lever.

NOTES:

® Be sure that no speaker wire protrudes and contacts other

if speakers that are not magnetically shielded are placed close to the

than its own terminal.

sides of the unit, the magnetic influence may disturb the color of the

® Be sure to correctly connect the RIGHT and LEFT speakers,

display. In this event, move the speakers at least 50 cm (20 in.) away

and the + and —

polarities. If the polarities of one of the

from the sides of the Hi-Fi Monitor Receiver unit.

speakers are connected improperly, the right and left speakers

will operate in reverse phase, and the sense of stereo sound

will be lost.

AFT SWITCH

1. Set the FUNCTION selector to TV.

2. Setthe AFT switch to OFF.

4, Set the AFT switch to ON again.