Dinel GPLS-25 Series Kullanım Kılavuzu - Sayfa 5

Anahtar Dinel GPLS-25 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dinel GPLS-25 Series 14 sayfaları. Thru-wall level switches
Ayrıca Dinel GPLS-25 Series için: Kullanım Kılavuzu (12 sayfalar)

Sayfayı Yazdır

5. Installation and putting into operation

Please follow next 4 steps:

• Mechanical mounting

• Electrical connection

• Settings

- see chapter

6. Mechanical mounting

THE SENSOR TYPE GPLS – 25N – 0

•

is intended to point level detection on plastic or

glass and gauge-tubes.

•

The sensor is fixed to the gauge pipe or tube by

means of two plastic straps (2.5 mm width). The

cable should be vertically downwards oriented.

The maximum wall thickness of the tube depends

on the detected medium (see technical data), the

maximum is 8 mm.

THE SENSOR TYPE GPLS – 25N – 1

•

is intended to thru-wall level sensing of liquids in

plastic or glass vessels with flat walls.

•

The sensor is installed on a clean and degreased

surface of the vessel wall. The attachment is done

by doublesides adhesive layer. Orientation of the

sensor can be arbitrary. Maximum thickness of

the vessel wall depends on the detected medium

(see technical data), the maximum is 8 mm.

GPLS-25

- see chapter

Plastic straps