AEORC RX247 Kullanım Kılavuzu - Sayfa 2

Alıcı AEORC RX247 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AEORC RX247 2 sayfaları. Mini micro receiver (2ch with linear servo)

How to use ESC

Connect the positive pole of the brushed motor to"M+" and the negative pole to "M-"to replace the

throttle channel, as above picture.

The integrated brushed ESC has the lock function of preventing accidental touch. After the receiver is

powered on, the throttle channel remains at the lowest position for more than 2 seconds, then this function

can be canceled and the brushed ESC can be used normally.

How to use linear servo

After combining the transmitter, then can control 2pcs linear servos.(Usually, used for the horizontal tail and

vertical tail.)

If you need to adjust the channel sequence or reverse, you can use transmitter's channel mapping function

to revise it.

TELEM Function Introduction

Firstly , you need a remote control with TELEM to use this TELEM function.

This function could realize real-time monitoring to battery voltage, receiver voltage, receiver signal strength

and receiver operating temperature, allowing users to master the working status of receiver and battery in

real time to avoid unexpected situations in flight.

AEORC RX24x Series Mini Micro Receiver (2CH with Linear Servo)

Instruction Manual