Dinel ULM-53 series Kullanım Kılavuzu - Sayfa 8

Lazer Seviyesi Dinel ULM-53 series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dinel ULM-53 series 20 sayfaları. Ultrasonic level meters
Ayrıca Dinel ULM-53 series için: Kullanım Kılavuzu (20 sayfalar), Manuel (8 sayfalar), Manuel (6 sayfalar)

Sayfayı Yazdır

g) Foam on the level absorbs the acoustic wave

reflection which might cause malfunction of the

level meter. For mounting find the location where

the foaming is as low as possible (Fig. 5).

h) Emitted acoustic signal must not be affected by

near objects (ladders, mixers, propellers, etc.),

stream of filling, air flow, etc. (Fig. 6).

Fig. 6: Minimum distance of the level meter to nearby objects

Do not install the level meter in or above the filling point (Fig. 7).

Fig. 7: Level meter installation outside the influence of filling circulation

In case the level of bulk-solid materials is measured, the measurement range is reduced. We

recommend to consult the use with the manufacturer.

in the tank

Fig. 5: Thick foam on the surface

x > 1/12 c

ULM–53–02 ; 10

(min. 200 mm)

x > 1/8 c

ULM–53–06

(min. 200 mm)

x > 1/10 c

ULM–53–20

(min. 200 mm)

x – distance to the edge of the longest object

c – measurement range of the level meter

ULM–53