3Com Etherlink 3C905B-TX Hızlı Kılavuz - Sayfa 9

Ağ Kartı 3Com Etherlink 3C905B-TX için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. 3Com Etherlink 3C905B-TX 12 sayfaları. Etherlink pci network interface cards
Ayrıca 3Com Etherlink 3C905B-TX için: Hızlı Kılavuz (15 sayfalar), Hızlı Kılavuz (12 sayfalar)

Sayfayı Yazdır

If the NIC is not disabled and a red X still appears next to the

name of the NIC, update the driver by following these steps:

a Double-click the name of the NIC.

b Select the Driver tab, and then click the Update Driver

c Insert EtherDisk diskette 2 when prompted for a disk.

If a yellow exclamation point (!) appears next to the name

of the NIC, the installation is not complete. See the

user guide for troubleshooting help.

Upgrading from Windows 95 to Windows 98

If you are upgrading a PC from Windows 95 to Windows 98

that already has a Fast EtherLink XL (3C905B-TX) NIC

installed, you may have to update the driver in the

Device Manager using EtherDisk diskette 2.

Follow the instructions in the previous section, "Conﬁrming

Installation," to determine if you have to update the driver.

Windows NT 4.0

This section describes how to install the network driver

in a PC running Windows NT version 4.0. Before you

begin, obtain the EtherDisk diskette 2 and Windows NT

installation ﬁles. If Windows NT networking is not installed

or if you are replacing an installed NIC, see the user guide

for more information.

To install the network driver in a PC running Windows NT

version 4.0:

1 Make sure that the NIC is installed and is connected

to the network, as described earlier.

2 Restart the PC and start Windows NT.

3 In the Control Panel, double-click Network.

4 In the Network window, select the Adapter tab.

button.

Continue with the installation by following the prompts

on the screen.

Windows NT 4.0