3Com Etherlink 3C905B-TX Hızlı Kılavuz - Sayfa 4

Ağ Kartı 3Com Etherlink 3C905B-TX için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. 3Com Etherlink 3C905B-TX 12 sayfaları. Etherlink pci network interface cards
Ayrıca 3Com Etherlink 3C905B-TX için: Hızlı Kılavuz (12 sayfalar), Hızlı Kılavuz (15 sayfalar)

Sayfayı Yazdır

| 4

ETHERLINK® PCI NETWORK INTERFACE CARDS QUICK GUIDE

Chae

7 Click Install NIC Driver.

To install the network driver and the 3Com NIC

Diagnostics program, click Install with Diagnostic Program.

To install the network driver only, click

Install without Diagnostic Program.

Files are copied. A message box appears when the

installation is complete.

8 Click OK.

Select your operating system to continue

the installation.

The Completing NIC Installation screen appears.

Click Done.

Exit the EtherCD, and then shut down Windows.

Turn off the power to the PC.

Do not remove the EtherCD from the CD-ROM drive.

The next step is to install the NIC in the PC.

Installing the NIC in the PC

To install the NIC in the PC:

1 Make sure that you have run the preinstallation

program, as described in the previous section.

2 Remove all jewelry from your hands and wrists. Use

only insulated or nonconducting tools.

3 Turn off the power to the PC and unplug the

power cord.

Remove the cover from the PC.

5 Locate an empty, nonshared bus-mastering PCI slot

and remove its slot cover. Save the screw.

Do not install the NIC in a shared PCI slot. Avoid any

PCI slot next to an ISA slot. This is often a shared slot

and does not support bus mastering.