Aeotec AEOEZW140 Manuel - Sayfa 4

Anahtar Aeotec AEOEZW140 için çevrimiçi göz atın veya pdf Manuel indirin. Aeotec AEOEZW140 7 sayfaları. Dual nano switch

Sayfayı Yazdır
Setting
0
1
Parameter 82: To set which notification would be sent to the associated nodes in association group 4
To set which notification would be sent to the associated nodes in association Group 4 when using the external switch 2 to switch the loads.
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 83: Configure the state of LED when it is in 3 modes
Configure the state of LED when it is in 3 modes (Energy mode, Momentary indicate mode, Night light mode)
Size: 1 Byte, Default Value: 0
Setting
0
1
2
Parameter 84: Set the ON/OFF time of the LED when it is in Night light mode.
Set the ON/OFF time of the LED when it is in Night light mode.
Size: 1 Byte, Default Value: 301991936
Setting
0 - 60
256 - 316
65536 - 65596
16777216 - 16777276
Parameter 86: Set appointment 1
Set the ON time of output load.
Size: 4 Byte, Default Value: 8327680
Setting
0 - 60
256 - 316
65536 - 65543
16777215
16777216
Parameter 87: Set appointment 2
Set the OFF time of output load.
Size: 4 Byte, Default Value: 8327680
Setting
0 - 60
256 - 316
65536 - 65543
16777215
16777216
Parameter 120: Configure the external switch mode for S1.
Configure the external switch mode for S1.
Size: 1 Byte, Default Value: 0
Description
Send Nothing
Send Basic Set CC
Description
Send Nothing
Send Basic Set CC
Description
Energy mode. The LED will follow the status (on/off).
Momentary indicate mode. When the state of Switchu2019s load changed, the LED will follow the status (on/off)
of its load, but the LED will turn off after 5 seconds if there is no any switch action.
Night light mode. The LED will remain ON state.
Description
The minute time of OFF
The hour time of OFF
The minute time of ON
The hour time of ON
Description
The minute value of ON time
The hour value of ON time
The day value (Mon to Sun)
Disable the setting.
Enable the setting.
Description
The minute value of ON time
The hour value of ON time
The day value (Mon to Sun)
Disable the setting.
Enable the setting.