Aeotec ZWA003-A/C Kullanım Kılavuzu - Sayfa 9

Anahtar Aeotec ZWA003-A/C için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aeotec ZWA003-A/C 10 sayfaları.

NanoMote Quad offers three button action types, including short press, press and hold,

release.

Short press allows NanoMote Quad sends:

Central scene notification commands to the associated nodes.

Basic set command to the associated nodes.

Switch multilevel set command to the associated nodes.

Press and Hold (more than 2 seconds) allows NanoMote Quad sends:

Central scene notification command to the associated nodes.

Multilevel start level change command to the associated nodes.

Release allows NanoMote Quad sends:

Central scene notification command to the associated nodes.

Multilevel stop level change command to the associated nodes.

XVI. ADVANCED CONFIGURATION

NanoMote Quad offers a wide variety of advanced configuration settings. Below parameters can be

accessed from main controllers configuration interface.

Parameter No.32 Level of low battery.

Available settings: 10-50 (10% - 50%)

Default setting: 20 (20%)

Parameter size: 1[byte]

Parameter No.41 Enable send central scene notification.

0 - Disable.

1 – Enable.

Default setting: 1

Parameter size: 1[byte]

Parameter No.42 Setting the duration value of the command switch multilevel.

Available settings: 0-255

Default setting: 255

Parameter size: 1[byte]

Parameter No.43 Enable/disable the buzzer alarm when battery is running low.