Ariston CLAS SYSTEM One Kullanıcı Kılavuzu - Sayfa 7
Kazan Ariston CLAS SYSTEM One için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ariston CLAS SYSTEM One 12 sayfaları. Condensing wall-hung gas boiler
Sayfayı Yazdır
Domestic hot water temperature adjustement
only for CLAS ONE / CLAS NET ONE MODELS
It is possible to set the temperature of the domestic hot water
by pressing the buttons 2 a temperature may be obtained which
varies from 36°C to 60°C.The value set previously will flash on
the display.
Switching off the heating
To switch off the heating, press the MODE button 3; the heating
operation symbol will disappear from the display. The Mode
button can be used to keep the domestic hot water production
process active or to place it in standby (modes deactivated).
In the figure below the boiler remains active only for the
production of domestic hot water, indicating the set temperature.
Switching off the boiler
To switch off the boiler press the ON/OFF button, the display will
switch off.
The Anti-Frost Function remains active.
ATTENTION!!
Switch off the boiler completely by switching the external elec-
trical switch to the OFF position. Shut off the gas valve.
Clock Instructions
C
B
A
9
1. General layout
The mechanical clock covers a 24 hour period. Each tappet
represents 15 minutes A. An override switch is located on the
clock B.
2. To set the time
To set the time of day, grasp the outer edge of the dial and turn
slowly clockwise until the correct time is lined up with the arrow
C.
3. To Set the "On" and "Off" times
The clock uses a 24hours system. e.g. 8 = 8.00 am and 18 =
6.00 pm "ON" periods are set by sliding all tappets between
the "ON" time and the "OFF" time to the outer edge of the dial.
The tappets remaining at the centre of the dial are the "OFF"
periods.
4. For operation
Put the selector switch B to the
central heating by the clock. Put the switch B to "I" to select
permanent operation or to "0" to turn the central heating off
permanently.
USER'S MANUAL
12
3
6
symbol to control the
/
7