Ariston GENUS HE 38 Kullanıcı Kılavuzu - Sayfa 7
Kazan Ariston GENUS HE 38 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ariston GENUS HE 38 16 sayfaları. Condensing wall hung system boiler
Ayrıca Ariston GENUS HE 38 için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Accessing the settings and adjustment menus
The Menu/Ok button can be used to access a series of menus which
enable boiler operation to be adapted to the system and to the
demands of the user.
The available menus are as follows:
menu 0 = Time-Date-Language
menu 1 = Set Timers
menu 4 = Zone1 Parameters (submenu 0 - parameter 0 1 )
menu 5 = Zone Parameters (submenu 0 - parameter 0 1 )
menu Info - accessible with Info button
The parameters relating to each individual menu are listed in the
following pages.
The various parameters can be accessed and modified using the
Menu/Ok button, Mode button and the encoder (see fig. below).
The description of the menus and of each individual parameter will
be shown on the display.
Mode
button
Encoder
(C.H. Temp.
adjusting knob)
Enables the set
values to be
increased or
decreased
Display Informations
digits
menu
Abcdefghijklmno
setting
menu
paramètre
Scrolling text
valeur paramètre
Clock
button
bar
Summer
Menu/Ok
button
Commentaire sur Afficheur
MENU 0
description
"Display text"
0
TIME-DATE-LANGUAGE
0
0
Setting Display Language
"Language"
0
1
Setting Time - Date
"Set Time + Date"
0
2
British Summer Time
Set Language display
The language is set from menu 0 – sub-menu 0, proceed as
follows:
- press the M
/o
button, the display will flash000;
enu
k
- press the M
/o
button, the display will flash
enu
k
- press the M
/o
button to access the sub-menu ;
enu
k
- turn the CH knob, the display will give a list of available langua-
ges.
Once the language has been selected, press the MENU/OK but-
ton to store the setting,
- press the Esc button to exit the menu.
Setting the time and date
The time and date is set from menu 0 - sub-menu 1, proceed as
follows:
- press the M
/o
button, the display will flash000;
enu
k
- press the M
/o
button, the display will flash
enu
k
- turn the CH knob
to select the sub-menu
- press the M
/o
button, to access the sub-menu ;
enu
k
- the hours, minutes etc. begin to flash in sequence (see table
above).
- Turn the encoder
to select the value and press the MODE
button to confirm each value entered.
- after the last requested value has been entered (the day of the
week), press the MENU/OK button to store the information en-
tered,
- press the ESC button to exit the menu.
British summer time
This is set from menu 0 – sub-menu 0; proceed as follows:
- press the MENU/OK
button;
- press the MENU/OK button again;
splay.
- turn the CH knob
to select sub-menu
- press the MENU/OK button again to access the sub-menu.
- press the MENU/OK button to enable the auto update function.
- press the ESC button to exit the menu.
User's manual
english
italiano
francais
...........
"Set hour and press
Hour
MODE"
"Set minute and press
minutes
MODE"
"Set year and press
year
MODE"
"Set month and press
month
MODE"
day
"Set day and press MODE"
day of the
"Set Week Day and
week
press OK"
(mon.... sun)
Manual
Automatic
000
;
000
;
010
will flash on the display.
000
000
will flash on the di-
020.
7