Aeotec NanoMote One Kullanım Kılavuzu - Sayfa 6

Ev Otomasyonu Aeotec NanoMote One için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aeotec NanoMote One 10 sayfaları.

send a low battery alarm to the main controller.

VII. WAKE UP

Pressing and holding button for 5 seconds and then release so the NanoMote One will wake up

itself and send wake-up notification out to Z-Wave Controller. After that, it can be operated to

update

parameters, OTA, and detect battery level etc.

VIII. CHILD LOCK FUNCTION

Child Lock function. If enable the Child Lock function, the LED indicator will not be on when press

down the button. To switch on/off the Child Lock function, please press and hold the button for 10

seconds, the LED indicator will be solid on in red. Then release the button, the LED indicator will

be continuously stay in red for 2 seconds. During this 2 seconds, please click the button once, the

LED light will be blink fast in red for 2 seconds.

IX. TESTING Z-WAVE NETWORK RANGE

Press and hold the button for 15 seconds, the LED light will be solid on in purple. Then release the

button, the LED light will be stay in purple for 2 seconds, during this 2 seconds, please click the

button once, it will start to test the Z-Wave network range and LED light will blink fast in purple.

After finish the test, if the LED light is in green, it refers to strong signal; if in blue, it refers to

medium signal, and if in red, it refers to weak signal or no signal.

TIP:

This function works only when

Wave network.

X. RESET NanoMote One

Reset procedure clears the NanoMote One's memory, including Z-Wave network information.

To reset NanoMote One:

Press and hold the button for 20 seconds, the LED light will be solid on in red. Then release the

button, the LED light will be stay in red for 2 seconds, during this 2 seconds, please click the button

once, it will start to restore factory default. At the same time, the LED light will be solid on in

colorful for 15 seconds. Then Sending Device Reset locally notification to the controller.

NanoMote One

has been included into a Z-