Ariston INTESA TP23 Kullanım Kılavuzu, Kurulum ve Servis Talimatları - Sayfa 37

Kazan Ariston INTESA TP23 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu, Kurulum ve Servis Talimatları indirin. Ariston INTESA TP23 50 sayfaları.

Servicing Instructions

10.4.2 Removing the gas valve

Important! Before removing the gas valve, ensure the gas sup-
ply is turned off.
1. Disconnect all the cables from the solenoid and modureg;
2. Remove the spark generator (see previous section);
3. Release the nuts "V" (F
. 10.32);
IG
4. Remove the screws "W" from the bottom of the gas valve (F
10.33);
5. Remove the gas valve (F
IG
F
. 10.32
IG
V
V
F
. 10.33
IG
W
F
. 10.34
IG
Supplied By www.heating spares.co Tel. 0161 620 6677
. 10.34).
W
10.5
Access to the Water Circuit
Important! Before any component is removed, the boiler
must be drained of all water.
10.5.1 Removing the D.H.W. (secondary) exchanger
1.Remove the screws "X" (F
.
IG
2.Disconnect the cable "Y" (F
3.Push the exchanger towards the rear of the boiler, and
lift upwards and remove out of the front of the boiler
(F
10.37-10.38);
IG
4.Before replacing the exchanger ensure that the O-rings
are in good condition and replace if necessary.
F
. 10.35
IG
X
F
. 10.36
IG
F
. 10.37
IG
37
10.35);
IG
10.36);
IG
X
Y