Ariston INTESA TP30 Kullanım Kılavuzu, Kurulum ve Servis Talimatları - Sayfa 31

Kazan Ariston INTESA TP30 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu, Kurulum ve Servis Talimatları indirin. Ariston INTESA TP30 50 sayfaları.

Sayfayı Yazdır

MAINTENANCE

It is recommended that the following inspections be carried

out on the boiler at least once a year:

1 -

Check the seals for the water connections; replace any

faulty seals.

2 -

Check the gas seals; replace any faulty gas seals.

3 -

Visual check of the entire unit.

4 -

Visual check of the combustion process or analysis of

combustion by-products (see section 3.6) and cleaning of

the burner if needed.

5 -

If called for by point. 3, dismantling and cleaning of the

combustion

chamber.

6 -

If called for by point. 4, dismantling and cleaning of the

burner jets.

7 -

Visual check of the primary heat exchanger:

- check for overheating in the blade assembly;

- clean the exhaust fan if needed.

8 -

Adjustment of the flow rate of the gas: flow rate for lighting,

partial load and full load.

9 -

Check of the heating safety systems:

- safety device for maximum temperature

(overheat thermostat);

- safety device for maximum pressure (safety valve).

10- Check of the gas safety systems:

- safety device for lack of gas or flame ionisation

(detection electrode);

- safety device for gas cock.

11- Check of the electrical connection (make sure it complies

with the instructions in the manual).

12- Check of domestic hot water production efficiency (flow

rate and temperature)

13- General check of the combustion by-products of the dis-

charge/ventilation system.

14- Check of the general performance of the unit.

Supplied By www.heating spares.co Tel. 0161 620 6677