Aeotec MULTISENSOR 6 Kullanıcı Kılavuzu - Sayfa 2

Güvenlik Sensörleri Aeotec MULTISENSOR 6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aeotec MULTISENSOR 6 8 sayfaları. Z-wave water and flood sensor
Ayrıca Aeotec MULTISENSOR 6 için: Kullanıcı Kılavuzu (13 sayfalar), Manuel (3 sayfalar), Manuel (10 sayfalar), Kullanıcı Kılavuzu (13 sayfalar)

Sayfayı Yazdır
Aeotec MULTISENSOR 6 Kullanıcı Kılavuzu
11/21/2017

Quick Start.

Power on Water Sensor 6.
Water Sensor 6 ships with its battery pre-installed but disconnected. To connect the battery;
1. Remove the battery tab by pulling it away from water sensor.
2. Press the sensor's Action Button; its LED will blink to indicate that the sensor is powered.
3. Secure Water Sensor 6's water proof cover using the screw provided in the package. On the rear of Water Sensor 6
you'll find 2 screw holes in opposing corners; one screw hole will not contain a screw. Insert the provided screw into
the empty hole and tighten it with a screw driver.
After securing the sensor plate your Water Sensor unit will have the waterproof rating of IP65.
Adding your Sensor to your Z-Wave Network.
https://aeotec.freshdesk.com/support/solutions/articles/6000171886-water-sensor-6-user-guide-
Water Sensor 6 user guide. : Aeotec by Aeon Labs
2/8