Ariston FH G S Kullanım Talimatları Kılavuzu - Sayfa 8

Fırın Ariston FH G S için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Ariston FH G S 48 sayfaları.

Sayfayı Yazdır

Installation

! Please keep this instruction booklet in a safe place for future reference. If

the appliance is sold, given away or moved, please make sure the booklet is

also passed on to the new owners so that they may benefit from the advice

contained within it.

! Please read this instruction manual carefully: it contains important information

concerning the safe operation, installation and maintenance of the appliance.

Positioning

! Do not let children play with the packaging material; it should be disposed

of in accordance with local separated waste collection standards (see

Precautions and tips).

! The appliance must be installed by a qualified professional in accordance

with the instructions provided. Incorrect installation may damage property or

cause harm to people or animals.

• The room must be equipped with an air extraction system that expels

any combustion fumes. This may consist of a hood or an electric fan that

automatically starts each time the appliance is switched on.

In a chimney stack or branched flue.

(exclusively for cooking appliances)

• The room must also allow proper air circulation, as air is needed for

combustion to occur normally. The flow of air must not be less than 2 m

per kW of installed power.

Examples of

ventilation holes

for comburant air.

Adjacent

Room to be

Room

Vented

Enlarging the ventilation slot

between window and floor.

• Liquid petroleum gas sinks to the floor as it is heavier than air. Therefore,

rooms containing LPG cylinders must also be equipped with vents to allow

gas to escape in the event of a leak. As a result LPG cylinders, whether

partially or completely full, must not be installed or stored in rooms or

storage areas that are below ground level (cellars, etc.). It is advisable to

keep only the cylinder being used in the room, positioned so that it is not

subject to heat produced by external sources (ovens, fireplaces, stoves,

etc. ) which could raise the temperature of the cylinder above 50°C.

Directly to

the Outside

The air circulation system may take air directly

from the outside by means of a pipe with an

inner cross section of at least 100 cm

opening must not be vulnerable to any type

of blockages.

The system can also provide the air needed

for combustion indirectly, i.e. from adjacent

rooms fitted with air circulation tubes as

described above. However, these rooms must

not be communal rooms, bedrooms or rooms

that may present a fire hazard.

Built-in appliances

Use an appropriate cabinet to ensure that the appliance operates properly:

• The panels adjacent to the oven must be made of heat-resistant material.

• Cabinets with a veneer exterior must be assembled with glues which can

withstand temperatures of up to 100°C.

• To install the oven under the counter (see diagram) or in a kitchen unit,

the cabinet must have the following dimensions:

! The appliance must not come into contact with electrical parts once it has

been installed. The indications for consumption given on the data plate have

been calculated for this type of installation.

Ventilation

To ensure adequate ventilation, the back panel of the cabinet must be

removed. It is advisable to install the oven so that it rests on two strips of

wood, or on a completely flat surface with an opening of at least 45 x 560

mm (see diagrams).

; the

Centring and fixing

Secure the appliance to the cabinet by opening the oven door and inserting

4 screws into the 4 holes on the outer frame.

! All parts which ensure the safe operation of the appliance must not be

removable without the aid of a tool.