Cal Flame FPR 4000 Kullanıcı El Kitabı - Sayfa 9

Kapalı Şömine Cal Flame FPR 4000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Cal Flame FPR 4000 14 sayfaları.

Installation and Assembly

Fireplace Log Set Placement

The log set, log grate and crushed lava rock are shipped

together. Remove the log set and un-pack all components.

The logs are fragile -- use care when handling.

Do not install the log set in an unvented appliance.

Once the fireplace is in position, level and safely hooked

up to the proper fuel supply, install the log grate over the

plate burner.

Place the lava rock around the flat burner plate. DO NOT

place the lava rock on the burner plate as it will affect the

flow of the flame.

Place two logs length wise in the grate and position

remaining logs over them in an angled position as shown

below. Ensure the logs are place securely to avoid any

movement.

NOTE: Be sure unit is cool before touching any of

the components .

FRP 4000 Fireplace Owner's Manual

Page 7

LTR20081045, Rev. A