3Com 3C16692 Kullanıcı Kılavuzu - Sayfa 2
Ağ Donanımı 3Com 3C16692 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 3Com 3C16692 2 sayfaları. Superstack ii dual speed hub – ps hub cascade converter kit
Sayfayı Yazdır
16692ug.fm Page 2 Tuesday, January 6, 1998 5:35 PM
Using the Cascade Converter Kit
The Cascade Converter Kit links the bottom unit in your PS Hub stack to the top
unit in your Dual Speed Hub 500 stack, so the PS Hub stack should be above the
Dual Speed Hub 500 stack.
For safety information, refer to the information in the user guides that accompany
the Dual Speed Hub 500 and the PS Hub.
Connecting to the PS Hub
1
To connect to the PS Hub, connect the Cascade Converter to the DOWN port of the
bottom unit in the PS Hub stack, as shown below.
2
Connecting to the Dual Speed Hub 500
To connect to the Dual Speed Hub 500, connect the Cascade Cable (that is
connected to the Cascade Converter) directly to the UP port of the top unit in the
Dual Speed Hub 500 stack, as shown below.
If you are using Hot Swap Cascade Units with your Dual Speed Hub 500 stack or
PS Hub stack, you can connect the Cascade Converter Kit directly to these Hot Swap
Cascade Units.
Part No. DUA1669-2AAA01 / Published October 1997
© 3Com Technologies, 1997. All rights reserved. No part of this documentation may be reproduced in any form or by
any means or used to make any derivative work (such as translation, transformation, or adaptation) without permission
from 3Com Technologies. 3Com and SuperStack are registered trademarks of 3Com Corporation. Unless otherwise
indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other
countries.
U P
D O W
N