Ariston ENBY 19*** F O3 Kullanım Talimatları Kılavuzu - Sayfa 6

Buzdolabı Ariston ENBY 19*** F O3 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Ariston ENBY 19*** F O3 17 sayfaları. Refrigerator/freezer combination

Sayfayı Yazdır

Installation

! Before placing your new appliance into operation please read these

operating instructions carefully. They contain important information for safe

use, for installation and for care of the appliance.

! Please keep these operating instructions for future reference. Pass

them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser

give off heat and require good ventilation to operate correctly and

save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between

the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation kit,

following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically

and wait at least 3 hours before connecting it to the electricity mains.

Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left side

of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated on

the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised technician

to replace it ( see Assistance ). Do not use extension cords or

multiple sockets.

! Once the appliance has been installed, the power supply cable and

the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

! The manufacturer declines any liability should these safety

measures not be observed.

Start-up and use

Starting the appliance

! After transportation of the appliance, carefully place it in an upright

position and wait at least 3 hours before connecting it to the electricity

mains, to make sure it operates as it should.

• Clean the inside of the refrigerator well using warm water and

bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system which

makes the compressor start approximately 8 minutes after being

switched on. The compressor also starts each time the power

supply is cut off whether voluntarily or involuntarily (blackout).

Freezer Compartment

When the product is switched on the freezer compartment is set to its

default value of -18°C. We recommend that the SUPER FREEZE

function is set in order to accelerate the cooling process of the

compartment; when the inside of the compartment has reached its

optimal temperature the function will be deactivated and the food may

be placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator compartment is

set to its default value of +5°C. We recommend that the SUPER COOL

function is set in order to accelerate the cooling process of the

compartment. After a few hours it will be cool enough for food to be

placed inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer compartment

displays will indicate the temperature values set at that moment. To

change them, simply press the - and + buttons corresponding to the

compartment for which you wish to change the set temperature. More

specifically, each time the buttons are pressed, the temperature

increases or decreases and the level of cold generated inside the

compartment is adjusted accordingly. The temperature values that

may be selected for the refrigerator compartment are +8°C, +7°C,

+6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set

for the freezer are -18°C, -19°C, -20°C, -21°C, -22°C,-23°C ,-24°C

-25°Cand -26°C. If SUPER FREEZE functions is activated, Freezer

temperature cannot be modified.

Chiller system

NO FROST

The No Frost system circulates cold air continuously to collect humidity

and prevent ice and frost formation. The system maintains an optimal

humidity level in the compartment, preserving the original quality of

the food, preventing the food from sticking together and making

defrosting a thing of the past. Do not block the aeration cells by

placing food or containers near the refrigerating back panel.

! ! ! ! ! Close bottles and wrap food tightly.

ACTIVE OXIGEN

This device releases ozone molecules inside the refrigerator; ozone

is a natural substance which combats bacteria and microorganisms,

reducing their proliferation while limiting unpleasant

odours.Automatically defines the amount of ozone required for

prolonging the freshness of foodstuffs, eliminating odours and

preventing bacteria build-up.There may be a slight distinctive odour

inside the refrigerator. The very same smell can sometimes be detected

during a storm, due to the ozone produced as the charge in the

lightning bolts is released; this is completely normal. The amount

produced by the device is very small and abates quickly as the

antibacterial action takes place.Device is activated by pressing the

dedicated key on the display located in front of the fridge door.With

the Active Oxigen switched on, the device will operate a repeted

cycle until the key is pressed again. There will be an Ozone emission