Acom 1010 Kullanım Kılavuzu - Sayfa 6

Amplifikatör Acom 1010 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Acom 1010 20 sayfaları. External radio frequency power amplifier
Ayrıca Acom 1010 için: Şematik Belge (14 sayfalar), Şematik Diyagramlar (15 sayfalar)

Sayfayı Yazdır

The amplifier works with voltages up to 3000 V dc, which are potentially

LETHAL! You must unplug the amplifier from the line (mains) wall outlet

and WAIT AT LEAST 30 minutes before removing the cover of the amplifier.

Do not touch any part inside while the amplifier is open because dangerous

voltages may remain present.

NEVER ALLOW ANYONE, ESPECIALLY CHILDREN, to push anything

into the case holes or to otherwise touch the amplifier or its connecting

cables. There is grave danger of fatal electrical shock. NEVER TOUCH AN

ANTENNA during transmission as this may result in an electric shock or

burns. NEVER EXPOSE the amplifier to rain, snow or any liquids. AVOID

placing the amplifier in excessively dusty environments. DO NOT OBSTRUCT

AIR INTAKE (bottom) or EXHAUST (top cover) areas of the amplifier. Keep

a minimum distance of 50cm (20 inches) clear of the air exhaust opening.

Do not undertake or perform any repair or adjustment of your amplifier

yourself, including any attempt to change hardware or firmware. Doing so

creates a potentially fatal shock hazard and may damage the amplifier or

equipment connected to it. ACOM is not responsible for any such personal

injury or equipment damage, whether caused by accident or as a result of

good faith efforts at repair or adjustment.

To avoid damage to the amplifier not covered by ACOM's warranty, the user is

expected to read and comply with the installation instructions contained in Section 2

of this operating manual. If there are any doubts or questions concerning installation,

operation or safety of the amplifier, the user should contact ACOM.

2. INSTALLATION

2-1. Unpacking and Initial Inspection

The first step to installation is to fully read this manual. Then, carefully inspect the

shipping cartons for any physical damage. ACOM ships amplifiers in highly protected

containers, but it cannot assure that mistreatment by shippers will not occur. If there

is any such damage, notify your ACOM dealer immediately. Failure to do so may

invalidate your warranty. In any case, be sure to keep all packing materials for possible

future amplifier shipment.

WARNING HIGH VOLTAGE!

WARNING

CAUTION

NOTE