Whirlpool 3363565 Kullanım ve Bakım Kılavuzu - Sayfa 8

Yıkayıcı Whirlpool 3363565 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3363565 22 sayfaları. Two speed automatic washers

Using
rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and spin
is needed.
1. To add an additional rinse, push in the
Cycle Control Knob and turn clockwise to
RINSE, as illustrated.
2. Pull out the Cycle Control Knob. The
washer fills to selected load size,
agitates, drains, and spins.
Using
drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in the Cycle Control Knob and turn
clockwise to SPIN, as illustrated.
2. Pull out the Cycle Control Knob. The
washer drains, then spins.
Understanding
normal
washer
sounds
Your new washer may make sounds that
your old one didn't. Because the sounds are
unfamiliar, you may be concerned about
them. Don't be; most of them are normal.
The following describes some of the
sounds you may hear and what causes
them.
During
washing
When you select a small load size setting for
a small wash load, your washer has a lower
water level. With this lower water level, you
may hear a clicking sound from the upper
portion of the agitator.
During
drain
The rate that water is drained from your
washer depends on your installation.
If water
is drained quickly from the washer, you may
hear air being pulled through the pump. This
happens during the end of draining.
After
drain
and before
spin
When the cycle changes from draining to
spinning, you may hear gears engaging.
8