Whirlpool 6LBR5132BQ2 Kullanım ve Bakım Kılavuzu - Sayfa 9
Yıkayıcı Whirlpool 6LBR5132BQ2 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 6LBR5132BQ2 20 sayfaları. Whirlpool one speed automatic washer use and care guide
![Whirlpool 6LBR5132BQ2 Kullanım ve Bakım Kılavuzu](/uploads/products/server2/6792387/6792387.png)
Caring
for Your Washer
Proper care of your washer can extend its life. This section explains how to care for your
washer properly and safely.
Cleaning
your
washer
Exterior
Interior
Wipe up detergent, bleach, and other spills
q
with a soft, damp cloth or
sponge as they occur. Occa-
sionally wipe the outside of the
n
washer to keep it looking like
new.
Clean interior with 250 mL (1 cup) of chlo-
rine bleach mixed with 500 mL (2 cups) of
detergent. Run washer through a complete
cycle using hot water. Repeat process if
necessary.
Do not put sharp or metal objects in your
washer. They can damage the
finish. Check all pockets for
pins, clips, money, bolts, nuts,
etc. Do not lay these objects
on your washer after emptying
pockets.
NOTE: Remove hard water deposits using
only cleaners labeled as washer safe.
Winter
storage
or moving
care
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer. If storing or moving your washer during freezing
weather, winterize it.
To winterize
washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 L (1 quart) of R.V.-type antifreeze in
the basket.
4. Run washer on a drain and spin setting
(see page 7) for about 30 seconds to mix
the antifreeze and water.
5. Unplug the power supply cord.
To use washer again:
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Reconnect power supply cord.
5. Run the washer through a complete cycle
with 250 mL (1 cup) of detergent to clean
out antifreeze.
Non-use
or vacation
care
You should operate your washer only when
you are at home. If you will be on vacation
or not using your washer for an extended
period of time, you should:
l
Unplug the power supply cord or turn off
l
Turn off the water supply to the washer.
This helps avoid accidental flooding (due
to a water pressure surge) while you are
away.
electrical power to the washer.
9