Whirlpool 7MWFC5090KC Kullanım ve Bakım Kılavuzu ve Kurulum Talimatları - Sayfa 21
Yıkayıcı Whirlpool 7MWFC5090KC için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu ve Kurulum Talimatları indirin. Whirlpool 7MWFC5090KC 40 sayfaları. Smart all-in-one washer and dryer
Sayfayı Yazdır
Drain System
Drain system can be installed using a floor drain, wall standpipe,
floor standpipe, or laundry tub. Select method you need.
IMPORTANT:
To avoid siphoning, only 41⁄2" (114 mm) of drain
hose should be inside standpipe. Always secure drain hose with
cable tie.
Floor standpipe drain system
4,5"
1 (
1 (
1
1
4
4
m
m
m
m
)
)
(114 mm)
Minimum diameter for a standpipe drain: 2" (51 mm). Minimum
carry-away capacity: 17 gal. (64 L) per minute. A 2" (51 mm) di-
ameter to 1" (25 mm) diameter Standpipe Adapter Kit is available.
Top of standpipe must be at least 24" (60 cm) high; install no
higher than 49" (125 cm) from bottom of washer/dryer.
If you have an overhead sewer and need to pump higher than
96 inches, a sump pump and associated hardware are needed.
See "Assistance or Service."
Wall standpipe drain system
4,5"
(114 mm)
See requirements for floor standpipe drain system.
Máx. 49"
(125 cm)
Min. 24"
(60 cm)
Máx. 49"
(125 cm)
Mín. 24"
(60 cm)
Laundry tub drain system
4,5"
(114 mm)
Max. . x
( (
1
1
Minimum capacity: 20 gal. (76 L). Top of laundry tub must be at
least 24" (60 cm) above floor; install no higher than 49" (125 cm)
from bottom of washer/dryer.
Floor drain system
Floor drain system requires a Siphon Break Kit, two Connector
Kits, and an Extension Drain Hose that may be purchased
separately. See "Assistance or Service." Minimum siphon break
height: 28" (710 mm) from bottom of washer/dryer (additional
hoses may be needed).
Máx. 49"
m
m
a
a
. x
(125 cm) m
(125 cm)
2
2
5
5
0
0
m
m
m
) )
Min. . n
m . n
m
i
i
Mín. 24"
(60 cm) )
6 (
6 (
0
0
m
m
m
m
)
(60 cm)
21