Whirlpool 7MWTW1935DW0 Kullanım ve Bakım Kılavuzu - Sayfa 14
Yıkayıcı Whirlpool 7MWTW1935DW0 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 7MWTW1935DW0 36 sayfaları.
Sayfayı Yazdır
TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/product_help
-
In Canada www.whirlpool.ca
for assistance and to possibly avoid a service call.
if you experience
Possible Causes
Solution
Dry spots on load after
High speed spins extract more
The high spin speeds combined with air flow during the final
cycle
moisture than traditional top-load
spin can cause items near the top of the load to develop dry
washers,
spots during the final spin. This is normal.
Incorrect or wrong wash or
Check for proper water supply.
Make sure hot and cold inlet hoses are not reversed.
rinse temperatures
Energy saving controlled wash
temperatures.
Load not rinsed
Check for proper water supply.
Make sure hot and cold inlet hoses are not reversed.
Using too much detergent.
Washer not loaded as
recommended.
Sand, pet hair, lint, etc. on
Heavy sand, pet hair, lint, and
load after washing
detergent or bleach residues may
require additional rinsing.
Load is tangling
Washer not loaded as
recommended.
Washer not loaded as
recommended.
Adding detergent on top of load.
Not cleaning or removing
stains
Both hoses must be attached to both washer and faucet, and
have both hot and cold water flowing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.
Energy Star _> qualified washers use cooler wash and rinse water
temperatures
than traditional top-load washers. This includes
cooler hot and warm washes.
Both hoses must be attached and have water flowing to the
inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
The suds from too much detergent can keep washer from
operating correctly. Always measure detergent and follow
detergent directions based on load size and soil level.
The washer is less efficient at rinsing when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional garments after washer has started.
Select 2 Rinses for the selected cycle.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed;
however, items will be wetter than those using a higher speed
spin. See the "Cycle Guide" to match your load with the best
cycle.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the
recommended
cycle for the type of garments being washed.
Washer is less efficient at cleaning when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Add only 1 or 2 additional garments after washer has started.
Add detergent, Oxi products, and color-safe bleach to the
bottom of the basket before adding the load items.
14