Whirlpool 7MWTW1955EW Kullanım ve Bakım Kılavuzu - Sayfa 30
Yıkayıcı Whirlpool 7MWTW1955EW için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 7MWTW1955EW 33 sayfaları. Top-loading washer
TROUBLESHOOTING
First try the solutions suggested here or consult the warranty sheet in the washer for assistance and to possibly avoid a service call.
If you experience
Washer Not Performing As Expected (cont.)
Fabric damage
Odors
Lid Locked light
is flashing
Single-dose laundry
packet not dissolving
Washer pumps out water
before finishing cycle
30
Possible Causes
Liquid chlorine bleach may have
been added incorrectly.
Garment care instructions may not
have been followed.
Monthly maintenance not done
as recommended.
Using too much detergent.
The lid is not closed.
A cycle was stopped or paused using
the Inicio/Pausa (Start/Pause) button.
Adding laundry packet incorrectly.
Lid is left open for more than
10 minutes.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Always read and follow garment manufacturer's care label
instructions. See the "Cycle Guide" to match your load with the
best cycle.
See "Washer Care" in "Washer Maintenance".
Unload washer as soon as cycle is complete.
Be sure to measure correctly. Always follow the manufacturer's
directions.
See "Washer Care" section.
Close the lid. The washer will not start or fill with the lid open.
The washer may still be spinning. The lid will not unlock until the
basket has stopped spinning. This may take several minutes if
washing large loads or heavy fabrics.
Be sure laundry packet is added to washer basket before adding
clothes. Do not add packet to dispenser. Follow the
manufacturer's instructions to avoid damage to your garments.
Make sure lid is closed before starting a cycle and/or during
prewash (soak).
Solution