Whirlpool AWG 233 Kullanım Kılavuzu - Sayfa 35

Yıkayıcı Whirlpool AWG 233 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Whirlpool AWG 233 44 sayfaları.

Sayfayı Yazdır
FAILURE
Washing quality is
poor.
The water is drained
from the machine as
soon as it is filled.
No water is seen in the
drum during washing.
There is detergent
residue on the clothes.
There are grey stains
on the clothes.
(**) See the section concerning installation of your machine.
PROBABLE CAUSE
Machine load exceeds
maximum capacity.
Your water may be
hard.
Distribution of the
clothes in your
machine is not evenly-
balanced.
The end of the water
drain hose is
positioned too low in
relation to the machine.
No failure. The water is
in the lower part of the
drum.
Undissolved fragments
of certain detergents
may stick to your
clothes as white stains.
These stains may be
caused by oil, cream or
ointment.
33
METHODS OF
ELIMINATION
Load clothes into your
machine so as to avoid
exceeding its
maximum capacity.
Regulate the amount of
detergent used
according to the
detergent producer's
guidelines.
Spread the clothes
inside the machine in
an orderly and evenly-
balanced manner .
Place the water drain
hose at an appropriate
height.(**)
-
By calibrating your
machine for "Rinsing"
programme, run an
additional rinse or
eliminate stains after
drying with the help of
a brush.
Use the maximum
detergent amount
recommended by the
detergent producer
during the next
washing operation.