Whirlpool AWO/D 049 Kullanım Kılavuzu - Sayfa 10

Yıkayıcı Whirlpool AWO/D 049 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Whirlpool AWO/D 049 14 sayfaları. 5kg, 1000rpm fully integrated washing machine awo/d 049
Ayrıca Whirlpool AWO/D 049 için: Broşür (2 sayfalar), Kurulum Kılavuzu (14 sayfalar)

Sayfayı Yazdır

30110447GB.fm Page 10 Thursday, May 10, 2007 12:35 PM

TROUBLESHOOTING GUIDE

Your washing machine is equipped with various automatic safety functions. These enable faults to be

detected in good time and the safety system can react appropriately. These faults are frequently so minor

that they can be removed within a few minutes.

Problem

Appliance does not start,

no indicator lamps are on

Appliance does not start

although "Start/Pause"

has been pressed

Appliance stops during the

programme, and the

"Start/Pause" light flashes

Detergent dispenser

contains residues from

detergent and/or additives

Appliance vibrates during

spin cycle

Final spin results are poor The appliance has an imbalance detection and correction system. If

Black process 45.0° 100.0 LPI

Causes, Solutions, Tips

• Plug is not properly inserted in socket.

• Socket or fuse does not function correctly (use a table lamp or similar

appliance to test it).

• the "On/Off" button has not been pressed (if available on your model).

• Door is not properly closed.

• "Rinse hold" option is activated (if available on your model) and

(Rinse hold) lights up in the programme sequence indicator -

terminate "Rinse hold" by pressing "Start/Pause" or by choosing and

starting "Drain" programme (see separate programme chart).

• Programme has been changed - reselect desired programme and press

"Start/Pause".

• Programme has been interrupted and eventually door has been opened -

close door and restart programme by pressing "Start/Pause".

• The appliance's safety system has been activated (see "Description of red

indications" in your programme chart).

• Water tap is not opened or water inlet hose is kinked ("Water tap closed"

indication lights up).

• Separator in main wash chamber is not correctly installed or not adapted

to use of powder and liquid detergent (see "Detergents And Additives").

• Water entering is not enough; the mesh filters of the water supply could

be blocked (see "Care And Maintenance").

• Transport bolts have not been removed; before using the machine, it

is imperative that the transport bolts are removed.

• Appliance is not level / not standing firmly on all four feet (see separate

"Installation Guide").

individual heavy items are loaded (e.g. bathrobes), this system may reduce

the spin speed automatically or even interrupt the spin completely in order

to protect the washing machine.

• Heavy item(s) prevented spinning; add smaller articles of laundry and

repeat spin cycle.

• Excessive foam formation prevented spinning; select and start "Rinse &

Spin" programme. Avoid excessive detergent dosing (see "Detergents

And Additives").

• "Variable spin" button (if available on your model) has been set to a low

spin speed, or "No spin" option (if available on your model) has been

activated.

GB 10