Whirlpool Cabrio WTW5500XW1 Kullanım ve Bakım Kılavuzu - Sayfa 8
Yıkayıcı Whirlpool Cabrio WTW5500XW1 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool Cabrio WTW5500XW1 36 sayfaları. Top-loading high efficiency low-water washer
Sayfayı Yazdır"8. Select cycle settings
l Hot
l Extra Heavy
Warm
l Heavy
IHigh
_i
IM_I:
um
ILNWspin
Temp
Soil
Spin
Level
Speed
Once you select a cycle, the default settings for that cycle will be
lit. Press the cycle settings buttons to change the Temperature,
Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
Hot
Some cold water is added to save
Whites and pastels
Warm
ii
Some cold water will be added,
::i Bright colors
ii
0. Press START/Pause/Unlock
to begin wash cycle
START
Pause/Unlock
Press the START/PAUSE/UNLOCK
button to start the wash
cycle. Filling is delayed for several minutes while load balance is
sensed.When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking
the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/UNLOCK;
the lid will unlock once the
washer movement
has stopped. This may take several minutes
if the load was spinning at high speed. Then close the lid and
press START/PAUSE/UNLOCK
again to restart the cycle.
If lid is left open for more than 10 minutes, water will pump out.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load unbalance.
You will hear the hum of the spin prior to filling. This is normal
operation.
9, Select
cycle
options
CD
CD
Fabric
Extra
Softener
Rinse
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically
add certain
options such as Extra Rinse. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.
8