Ariston A45V Onarım Kılavuzu - Sayfa 10

Kurutucu Ariston A45V için çevrimiçi göz atın veya pdf Onarım Kılavuzu indirin. Ariston A45V 11 sayfaları.

10. DRUM BELT

Fig. 10-4

Fig. 10-5

•

To remove Toe Kick (Fig. 11-1), remove the Left and Right Side

Panels as described in Section 8. With the Side Panels removed,

remove the two (2) Phillips screws that hold the Toe Kick in place

and slide the Toe Kick off from its mounting slots (Fig. 11-2).

REPAIR MANUAL

Fig. 10-1

Fig. 10-2

• To remove Drum Belt, first remove the Right Side

Panel as described in Section 8 (Fig. 10-1). Then

disengage the Drum Belt from the Pulley Wheels

(Fig.10-2). Next, remove the two (2) Phillips screws

that attach the Bearing Block Cover to the Rear Panel

(Fig. 10-3).

•

With the Bearing Block Cover removed, remove the

two (2) Phillips screws that attach the Drum Grounding

Strip (Fig. 10-4) then using a Needle Nose Pliers to

remove the Drive Pin (Fig. 10-5).

TECH NOTE: Be careful not to damage the Drive Pin,

•

Next, remove the Right Side Strut (A) (Fig.10-6). Now

separate the Rear Panel from the Drum and slide the

Drum Belt out and off (Fig. 10-6).

Fig. 10-6

Fig. 11-1

since you will need to reuse it.

A 45 V

Fig. 10-3

Fig. 11-2

Page: 7