Whirlpool 3ET16NK Kullanım ve Bakım Kılavuzu - Sayfa 14
Buzdolabı Whirlpool 3ET16NK için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3ET16NK 26 sayfaları. No-frost refrigerator-freezer
Sayfayı Yazdır
Removing
the base grille
Condenser
To remove the base grille:
1. Open the refrigerator door.
2. Grasp the grille with both hands.
3. Push down on the top edge of the grille to
coils
Defrost
pan . .
release the top clips.
4. Roll grille toward you to release top clips.
5. Pull grille away from the refrigerator.
NOTE: Do not remove the Tech Sheet
fastened behind the grille.
To replace the base grille:
1. Line up the edges of the grille with the
outside edges of the cabinet.
2. Roll the grille toward you.
3. Place the lower clips in the openings in
the metal panel.
4. Roll the grille toward the cabinet until the
top clips snap into place.
5. Close the refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 16.
C;ips
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb or removing
a light shield for cleaning, either unplug
the refrigerator or disconnect the electric-
ity leading to it at the main power supply.
Failure to do so could result in electrical
shock.
To change refrigerator
light:
1. Disconnect refrigerator from power
supply.
2. Reach behind Control Panel to remove
bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size and shape.
13