Whirlpool 3VED23DQDW00 Kullanım ve Bakım Kılavuzu - Sayfa 13

Buzdolabı Whirlpool 3VED23DQDW00 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3VED23DQDW00 33 sayfaları. No-frost refrigerator-freezer

Sayfayı Yazdır

Adjusting

the EZ-TRACK*

shelf

(on some

models)

To slide shelf side-to-side:

1. Lift slightly on shelf front.

2. Slide to desired location.

3. Lower shelf front to level position.

NOTE: You do not have to remove small

items from the shelf before moving it

side-to-side.

You may need to remove

larger items.

To remove the shelf:

1. Remove all items from the shelf.

2. Hold back of shelf with one hand.

3. Lift front of shelf to 45" angle.

4. Lower shelf slightly to release shelf

from upper channel track. Then pull

shelf straight out.

NOTE: Shelf is heavy. Make sure you

use both hands when removing shelf.

To remove shelf track:

1. Lift both sides of track slightly.

2. Pull track straight out.

To replace shelf track:

Guide track hooks into the shelf

support slots on the back wall of the

cabinet.

NOTE: Make sure both track hooks

are in slots and that the slots are

parallel to each other.

i. Push track backward and down.

3. Check that track is completely seated

in the shelf supports.

Lift front slightly.

Then slide to new

location.

Hold with both hands and lift front to

45" angle.

Hold both sides and lift up and out.

Shelf support

Make sure both sets of hooks are in

support

slots.